JK-2060AC Step Driver
āļĢāļŦāļąāļŠāļŠāļīāļāļāđāļē : JK2060AC
āļĢāļēāļāļē |
5,900.00 āļŋ |
āļāļģāļāļ§āļāļāļĩāđāļāļ°āļāļ·āđāļ | |
āļĢāļēāļāļēāļĢāļ§āļĄ | 5,900.00 āļŋ |
āļŠāļīāļāļāđāļēāđāļĄāđāđāļāļĩāļĒāļāļāļ
āļŠāļīāļāļāđāļēāļŦāļĄāļ
General Features: Micro Stepping Motor Driver for maximum current6A. It can use with AC power supply that the input voltage can receive from a transformer directly. The working input voltage is between 24VAC to60VAC
Characteristicsïž
1. power input type:24Vac~60Vac 24Vdc-80Vdc
2.Output current:2ï―6A
3.Mircosteppingïž1(1.8š)ã1/2ã1/4ã1/8ã1/16ã1/32ã1/64ã1/128ã1/256
1/5ã1/10ã1/25ã1/50ã1/125ã1/250
4.Protect form : Overheated protect, lock automatic half current ,error connect protect
5. Dimensionsïž147mm*97mm*30mm
6.Weightïž600g.
7.Working environmentïžTemperature-15ï―40âHumidity<90%ã
I/O Portsïž
1ãAC,ACïžAC power positive pole 24V~55V AC
Note:Must guard against exceeding 55V AC,
so as not to damage the module
2ãGNDïžDC power cathode
3ãA+ãA-ïžStepping motor one winding
4ãB+ãB-ïžStepping motor other winding
5ãCP +ãCP -ïžStepping pulse input+5V (Rising edge effective , rising edge duration >10ΞS)
6ãCW +ãCW-ïžStepping motor direction input, voltage level touched off,high towards, low reverse
7ãREST+ãREST-: motor free
ãNOTEïž
1, When ambient temperature is high or working current over 3A, fix the module on big metal shell ,
or use axle flows fan dispels the heat, to make the module run reliably for a long time.
2, Half current automatically: if control machine not send out signal in half second,
driver enter half current state of automatically for electricity saving, the phase current of the winding
of the electric
3, The fault phase is protected : When the double-phase electrical machinery is connected with driver ,
users are apt to connect the phase by mistake, thus would damage the driver seriously.
The protecting circuit is within this driver, when users connect by mistake, the driver will not be
damaged, but the electrical machinery runs abnormally, shake , and output is small.Please check
whether the wiring of electrical machinery is a mistake
Download Manual: http://www.mediafire.com/view/vf7970q45wft6z4/JK2060AC_STEP_DRIVE.pdf